rong data-start="1005" data-end="1019">Shelf Life

2 years in unopened containers when stored in cool, dry conditions.


Health and Safety

Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.

Follow all precautionary instructions on the container.

Ensure proper ventilation in the working environment.


HS Clearcoat

Substrates

Can be applied over solvent-based basecoats and properly prepared paintwork in good condition.


Mixing Ratio

2 parts clearcoat, 1 part hardener, plus 10–20% thinner.


Pot Life

3 hours at 23°C after mixing with hardener.


Spray Gun Tips

Nozzle: 1.3 mm

Conventional: 3.0–3.5 bar (45–50 psi)

HVLP: 2 bar (26–30 psi)


Spray Method

Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)

Apply 2 to 3 coats, total film thickness of 40–60 μm

Flash-off time between coats: 5–10 minutes at 23°C


Drying Time

At 15°C, the surface is dust-free in 50 minutes and polishable in 12 hours.

At 23°C, it is dust-free in 30–40 minutes and polishable in 6–8 hours.

At 60°C, it is dust-free in 10 minutes and polishable in 30 minutes.


Shelf Life

2 years in unopened containers when stored in cool, dry conditions.


Health and Safety

Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.

Follow all precautionary instructions on the container.

Ensure proper ventilation in the working environment.

MS Clearcoat

Substrates

Can be applied over solvent-based basecoats and properly prepared paint surfaces in good condition.


Mixing Ratio

2 parts clearcoat to 1 part hardener.


Pot Life

3 hours at 23°C after mixing with hardener.


Spray Gun Tips

Nozzle: 1.3 mm

Conventional: 3.0–3.5 bar (45–50 psi)

HVLP: 2 bar (26–30 psi)


Spray Method

Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)

Apply 2 to 3 coats, total film thickness of 40–60 μm

Flash-off time between coats: 5–10 minutes at 23°C


Drying Time

At 15°C, the surface is dust-free in 50 minutes and polishable in 12 hours.

At 23°C, it is dust-free in 30–40 minutes and polishable in 6–8 hours.

At 60°C, it is dust-free in 10 minutes and polishable in 30 minutes.


Shelf Life

2 years in unopened containers when stored in cool, dry conditions.


Health and Safety

Refer to the Material Safety Data Sheet (MSDS) for full information.

Follow all precautionary labels and instructions on the container.

Ensure good ventilation in the working area.

Polyester Putty

Substrates

Steel panel, iron panel, aluminum panel, fiberglass, wood surface.


Mixing ratio (Weight)

Polyester Putty: Hardener = 100:2


Layer Thickness

Putty can be applied in several thin coats. After each of them the product should cure. Do not extend thickness of 5 mm.


Pot life

2–7 minutes at 25°C.


Application

Clean the surface of oil, rust, old paint, and moisture. Make sure it is dry and clean before applying the putty.

Mix the putty with hardener at a 100:2 ratio until the color is even. Use it within the working time; otherwise, it will harden and become unusable.

Apply the mixed putty to the repair area. It’s recommended to apply a rough base layer first, then a thin finishing layer to reduce pinholes.

After full curing, sand the putty surface to the desired finish.


Drying time

30–40 minutes at 25°C.


Sanding

Coarse sanding (dry): P80–P120

Finishing sanding (dry): P120–P320


Shelf life

1 year in unopened containers when stored in cool, dry conditions.


Health and Safety

For full Health and Safety information please refer to Material Safety Data Sheet (MSDS)

Observe the precautionary notices displayed on the container.

Good ventilation must be provided in the working environment.

1K Basecoat

Substrates

Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.


Mixing Ratio

1 part basecoat to 1 part thinner.


Spray Gun Tips

Nozzle: 1.2–1.3 mm

Conventional: 3.0–3.5 bar (45–50 psi)

HVLP: 2 bar (26–30 psi)


Spray Method

Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)

Apply 2–3 coats, total film thickness of 15–25 µm

Flash-off time between coats: 5–10 minutes at 23°C

Flash-off time before applying clearcoat: 10–15 minutes


Shelf Life

2 years in unopened containers when stored in cool, dry conditions.


Health and Safety

Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.

Follow all safety instructions on the product label.

Ensure good ventilation during application.

1K Silver Series

Substrates

Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.


Mixing Ratio

1 part basecoat to 1 part thinner.


Spray Gun Tips

Nozzle: 1.2–1.3 mm

Conventional: 3.0–3.5 bar (45–50 psi)

HVLP: 2 bar (26–30 psi)


Spray Method

Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)

Apply 2–3 coats, total film thickness of 15–25 µm

Flash-off time between coats: 5–10 minutes at 23°C

Flash-off time before applying clearcoat: 10–15 minutes


Shelf Life

2 years in unopened containers when stored in cool, dry conditions.


Health and Safety

Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.

Follow all safety instructions on the product label.

Ensure good ventilation during application.

1K Pearl Series

Substrates

Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.


Mixing Ratio

1 part basecoat to 1 part thinner.


Spray Gun Tips

Nozzle: 1.2–1.3 mm

Conventional: 3.0–3.5 bar (45–50 psi)

HVLP: 2 bar (26–30 psi)


Spray Method

Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)

Apply 2–3 coats, total film thickness of 15–25 µm

Flash-off time between coats: 5–10 minutes at 23°C

Flash-off time before applying clearcoat: 10–15 minutes


Shelf Life

2 years in unopened containers when stored in cool, dry conditions.


Health and Safety

Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.

Follow all safety instructions on the product label.

Ensure good ventilation during application.

2K Solid Topcoat

Substrates

Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.


Mixing Ratio

2 parts topcoat, 1 part hardener, and 10–20% thinner.


Pot Life

3 hours at 23°C after mixing with hardener.


Spray Gun Tips

Nozzle: 1.2–1.3 mm

Conventional: 3.0–3.5 bar (45–50 psi)

HVLP: 2 bar (26–30 psi)


Spray Method

Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)

Apply 2–3 coats, total film thickness 40–60 µm

Flash-off time between coats: 5–10 minutes at 23°C


Drying Time

At 15°C: dust-free in 50 minutes, polishable in 12 hours

At 23°C: dust-free in 30–40 minutes, polishable in 6–8 hours

At 60°C: dust-free in 10 minutes, polishable in 30 minutes


Shelf Life

2 years in unopened containers when stored in cool, dry conditions.


Health and Safety

Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.

Follow all precautionary instructions on the product label.

Ensure proper ventilation during use.
VIEW ALL PRODUCTS

News Center