Substrates
Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.
Mixing Ratio
1 part basecoat to 1 part thinner.
Spray Gun Tips
Nozzle: 1.2–1.3 mm
Conventional: 3.0–3.5 bar (45–50 psi)
HVLP: 2 bar (26–30 psi)
Spray Method
Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)
Apply 2–3 coats, total film thickness of 15–25 µm
Flash-off time between coats: 5–10 minutes at 23°C
Flash-off time before applying clearcoat: 10–15 minutes
Shelf Life
2 years in unopened containers when stored in cool, dry conditions.
Health and Safety
Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.
Follow all safety instructions on the product label.
Ensure good ventilation during application.
Substrates
Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.
Mixing Ratio
1 part basecoat to 1 part thinner.
Spray Gun Tips
Nozzle: 1.2–1.3 mm
Conventional: 3.0–3.5 bar (45–50 psi)
HVLP: 2 bar (26–30 psi)
Spray Method
Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)
Apply 2–3 coats, total film thickness of 15–25 µm
Flash-off time between coats: 5–10 minutes at 23°C
Flash-off time before applying clearcoat: 10–15 minutes
Shelf Life
2 years in unopened containers when stored in cool, dry conditions.
Health and Safety
Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.
Follow all safety instructions on the product label.
Ensure good ventilation during application.
Substrates
Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.
Mixing Ratio
1 part basecoat to 1 part thinner.
Spray Gun Tips
Nozzle: 1.2–1.3 mm
Conventional: 3.0–3.5 bar (45–50 psi)
HVLP: 2 bar (26–30 psi)
Spray Method
Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)
Apply 2–3 coats, total film thickness of 15–25 µm
Flash-off time between coats: 5–10 minutes at 23°C
Flash-off time before applying clearcoat: 10–15 minutes
Shelf Life
2 years in unopened containers when stored in cool, dry conditions.
Health and Safety
Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.
Follow all safety instructions on the product label.
Ensure good ventilation during application.
Substrates
Can be applied over properly prepared old finishes, 1K filling putties, 2K fillers, 1K primers, and 2K primers. The surface must be clean and free of sanding dust and grease.
Mixing Ratio
2 parts topcoat, 1 part hardener, and 10–20% thinner.
Pot Life
3 hours at 23°C after mixing with hardener.
Spray Gun Tips
Nozzle: 1.2–1.3 mm
Conventional: 3.0–3.5 bar (45–50 psi)
HVLP: 2 bar (26–30 psi)
Spray Method
Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)
Apply 2–3 coats, total film thickness 40–60 µm
Flash-off time between coats: 5–10 minutes at 23°C
Drying Time
At 15°C: dust-free in 50 minutes, polishable in 12 hours
At 23°C: dust-free in 30–40 minutes, polishable in 6–8 hours
At 60°C: dust-free in 10 minutes, polishable in 30 minutes
Shelf Life
2 years in unopened containers when stored in cool, dry conditions.
Health and Safety
Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.
Follow all precautionary instructions on the product label.
Ensure proper ventilation during use.